Nader Circuit Breaker

Nader NDA series is suitable for indoor or outdoor use, domestic and similar purposes, only for AC, rated voltage above 50V but not exceeding 440V, and rated current not exceeding 25A. This product complies with GB / T 2099.1 and IEC 60884-1 standards...

Nader NDB1L-32 residual current operated circuit breaker is mainly used for low-voltage terminal power distribution system with AC rated working voltage of 230V and 400V and pole number of 1PN, 2P, 3P, 3PN and 4P. It is suitable for low-voltage terminal power distribution in industries, civil buildin...

Mainly applicable to the low-voltage terminal distribution system with the rated voltage of AC230/240V AC400/415V 50/60Hz in the industry civil buildings energy communication infrastructure...

Nader NDB1-63 series MCB is mainly used for short-circuit protection, overload protection and isolation of terminal power distribution system with AC rated working voltage of 230V to 415V, DC rated working voltage of 60V to 80V, rated frequency of 50Hz / 60Hz, rated working current of 1A to 63A, pole...

Nader MX+OF2 shunt release is installed on the left side of NDB2-63, NDB2T-63, NDB2Z-63, NDB2-40 and NDB2LE-63 series circuit breakers to remotely control the tripping action of the circuit breaker and indicate the on-off state of the circuit breaker....

Nader OF2 auxiliary contact is installed on the left side of NDB2-63, NDB2T-63, NDB2Z-63, NDB2-40 and NDB2LE-63 series circuit breakers to indicate the on and off status of the circuit breaker....